Elliptical Arc

Parent page: Sch Dialogs

The Elliptical Arc dialog.

Summary

This dialog allows the designer to specify the properties of an Elliptical Arc object. An elliptical arc is a non-electrical drawing primitive. It is essentially an open circular or elliptical curve that can be placed on a schematic sheet.

For information on how a placed elliptical arc object can be modified graphically, directly in the workspace, see Graphical Editing.

Access

The Elliptical Arc dialog can be accessed during placement by pressing the Tab key.

After placement, the dialog can be accessed in one of the following ways:

  • Double-clicking on the placed elliptical arc object.
  • Placing the cursor over the elliptical arc object, right-clicking and choosing Properties from the context menu.

Options/Controls

  • Line Width - the width of the arc line. Available widths are: Smallest, Small, Medium, and Large.
  • X-Radius - the radius of the arc in the horizontal plane (Y = 0), measured from its center point, to the center of the arc line.
  • Y-Radius - the radius of the arc in the vertical plane (X = 0), measured from its center point, to the center of the arc line.
  • Start Angle - the start angle of the arc, in degrees from the horizontal.
  • End Angle - the end angle of the arc, in degrees from the horizontal.
The arc is drawn in an anti-clockwise direction from the Start Angle to the End Angle. Enter a value between -360 and 360 for each of these angles.
  • Color - click the color sample to change the color of the arc, using the standard Choose Color dialog.
  • Location X/Y - the current X (horizontal) and Y (vertical) coordinates for the center point of the arc. Edit these values to change the position of the arc in the horizontal and/or vertical planes respectively.
  • Locked - enable this option to protect the arc from being edited graphically.
An object that has its Locked property enabled cannot be selected or graphically edited. Double click on the locked object directly and disable the Locked property, to graphically edit the object.

 

You are reporting an issue with the following selected text and/or image within the active document: