Grid Manager

Parent page: PCB Dialogs

The Grid Manager Dialog.


The Grid Manager dialog provides a centralized location from which to define and manage all grids for the active PCB document. The dialog provides all controls necessary to facilitate creation of your own customized, local placement grids. Supporting Cartesian and Polar grid 'flavors', you can define any number of grids for use in a document, which can even be nested as required. Tailor grids to suit both your personal placement preferences and design requirements – with the Grid Manager you'll never be short of a grid to get even the trickiest of placements achieved.

Double-click on a grid to open the Grid Editor, where its properties, such as the grid setting and it's colors can be defined.


These methods can be used to open the Grid Manager:

  • Using the Home | Grids and Units | Grids » Grids command on the Ribbon.  
  • From the right-click menu for the workspace - select Snap Grid » Grid Manager.
  • From the right-click menu for the workspace - select Options » Grid Manager.
  • Clicking the Grids button in the Board Options dialog (Design » Board Options).


  • Priority - In the workspace, priority is distinguished by drawing order. The highest priority grid (priority 1) will be drawn in front of all other grids, then the grid with priority level 2, and so on, down to the default Global Board Snap Grid, which is drawn behind all other custom grids.

Change the priority for a grid by selecting it in the list and using the Increment Priority and Decrement Priority commands, available from the dialog's right-click menu or Menu button. A number of keyboard shortcuts are also available for setting the priority:

    • U or Ctrl+Up Arrow – increase the priority of the focused grid.
    • D or Ctrl+Down Arrow – decrease the priority of the focused grid.
    • Number keys 1-9 – focus the grid with the same numeric priority. Shift focus to the default snap grid (Global Board Snap Grid) using the 0 (zero) key.
    • H or B – make the currently focused grid the highest priority (i.e. 1).
  • Name - Names of the Grids.
  • Description - Descriptions of the Grids
  • Fine - Color used for that grid, the color is defined in the Grid Editor, double click to edit.
  • Coarse - Color used for the multiplied grid. The Multiplier is set in the Grid Editor, double click to edit.
  • Non Comp/Comp - These options are used to control if the grid applies to all objects, only components, or only non-components. For each grid, the 2 checkboxes combine to give 4 possible options, as follows:
  COMP = Cleared COMP = Enabled
NON COMP = Cleared Grid is never visible or applied Grid is visible and only applied during component actions
NON COMP = Enabled Grid visible and applied for non-component actions Grid is visible and applied for both ordinary actions and component actions
  • Menu - Use Menu button to access a series of menus to add/delete Grids, setup Grids or Exporting and Importing Grids. The same menu can also be accessed by right-clicking in the dialog.


You are reporting an issue with the following selected text and/or image within the active document: